8 Phases of Swimming Pool Construction

/, Home Improvements/8 Phases of Swimming Pool Construction

Having a swimming pool in your home is a great improvement for the property. It allows you to have a place where you can hang out with your friends and family especially during the weekends where you can have a barbeque and relax by the pool to cool down a bit.

But the first step is to find a good pool builder Brisbane we recommend concrete pools Brisbane as they can help construct the swimming pool with no worries on your part. Swimming pool construction can be summarized in these 8 phases.

1. Designing the swimming pool

cornubia-pool-project-4There are many types of concrete swimming pools that you can go for. Do you prefer it to be round? Or maybe, you want it square? What colour do you want it? And how deep does it have to be? These are some things that you first need to decide as a homeowner.

2. Excavate

Once you’ve chosen the right design, it is time to excavate the area. At this point, a backhoe is going to be needed in order to efficiently dig through your property. At this point, you will need to have a permit, in order to avoid any legal problems such as running on utility lines while performing pool construction.

3. Grading the ground

On this step, builders start to flatten the ground to make it easier to install the walls.

4. Building a frame

The frame will be used in order to build the wall. The frame makes sure that the walls are going to make the walls even.

5. Plumbing work

A pool builder usually has a licensed Brisbane plumber on their team. Both supply and filtration system are installed at this point on a pool.

6. Pouring of the floor and building the wall

Once the plumbing work has been installed, it is now time to place the wall and the floor. A cement truck is usually used in this part of the construction.

7. Finish the walls

Once the contractor has cemented the walls and the floor of the pool, it is time to have a finish. Not only does it make the pool aesthetically appealing, it also serves as some type of moisture barrier. This prevents water from leaking outside.

8. Fill the outside

Now, it isn’t just the pool that you have to deal with. You also need to have a safe material used to fill the outside part of the pool. Expect that it can get wet, and may even be a bit slippery at times.

If you need a swimming Pool in Brisbane click here to learn more